Base parameters

Code	Description	Fixed
$BTRACE	Enables the `BAIM` trace utility. Set the parameter to `Yes` to enable the trace functionality. Set the parameter to `No` to disable the trace functionality. The default value for this parameter is `No` and should only be set to `Yes` at the request of a customer support technician. Example: No	No
$CATSF	Financial Parameter for Category code for type `SF`. Example: 1	No
$CATSH	Financial Parameter for Category code for type `SH`. Example: 1	No
$CATST	Financial Parameter for Category code for type `ST`. Example: 1	No
$LTRCDIR	Identifies the trace file directory created on the HxGN EAM server for the insertion of trace files for local transactions The value used in this parameter should be from the perspective of someone looking at a command prompt on the server. Do not use the value of a mapped drive. Example: F:\BAIMTRACE	No
$REQNUM	Parameter for Requisition Number from HxGN EAM to be sent to `APPS`. Example: YES	No
$RTRCDIR	Identifies the trace file directory created on the Oracle Applications server for the insertion of trace files for remote transactions You must only specify a value for `$RTRCDIR` for implementations in a distributed environment. The value used in this parameter should be from the perspective of someone looking at a command prompt on the server. Do not use the value of a mapped drive. Example: F:\BAIMTRACE	No
$SERVUOM	Unit of Measure for Service types to be sent to `APPS`. Example: EA	No
$SFLTYPE	Financial Parameter for Line type for type `SF`. Example: 1	No
$STLTYPE	Financial Parameter for Line type for type `SH,ST`. Example: 1	No
@ADDPO	This code indicates whether the Databridge Add PO Outbound transaction is activated. Example: Y	No
@ADDREQ	This code indicates whether the Databridge Add Requisition transaction is activated. Example: Y	No
@CANPO	This code indicates whether the Databridge Cancel PO Outbound transaction is activated. Example: Y	No
@CANPORL	This code indicates whether the Databridge Cancel requisition lines for Cancel PO Inbound transaction is activated. Example: N	No
@CANREQ	This code indicates whether the Databridge Cancel Requisition transaction is activated. Example: Y	No
@CHGPO	This code indicates whether the Databridge Change PO Outbound transaction is activated. Example: Y	No
@CHGREQ	This code indicates whether the Databridge Change Requisition is activated. Example: Y	No
@CSMGMT	This code indicates whether the Databridge Case Management outbound event is activated. Example: N
@DBPID	Databridge `DUNS+4` partner ID. Example: 2	Yes
@DOCKREC	Indicates whether the Databridge ReceivePO transaction will support on-dock receipts. Set to `Y` to enable on-dock receipts for the ReceivePO transaction. Example: N	No
@HMSINT	HxGN EAM is integrated with Infor HMS. Enter `YES` if integrated. Enter `NO` if not integrated. Example: NO	No
@INVREAP	Determines if Databridge will re-approve an approved invoice. If NO, the approved invoice will not be re-approved by Databridge, and no field except paid date is editable. If YES, Databridge will update and re-approve an approved invoice. This is default. Example: YES	No
@LDPAY	This code indicates whether the Databridge Load Payable Outbound transaction is activated. Example: Y	No
@MSGARCA	Determines if all messages get archived earlier than the archive cut-off date. Specify Y or N.	No
@NEWACT	This code indicates whether to automatically create an activity when `INFOREAM.ACT` tag is null. Example: N	No
@NEWPART	This code indicates whether to automatically create a new part when `ITEM` tag is null. Example: N	No
@NITMOUT	This code indicates whether the Databridge Sync Item Outbound transaction exports temporary parts. Example: N	No
@PORECV	This code indicates whether the Databridge Receive PO Outbound transaction is activated. Example: Y	No
@SECROLE	Determines if security role outbound is activated. Example: N	No
@STRBIN	Is Store bin outbound activated? Example: N	No
@SUPRMA	The Supplier RMA Outbound option determines whether the event is enabled. If Yes, when a supplier return is approved, Databridge generates an event. If No, Databridge will not generate an event. Example: N	No
@SYNCITM	This code indicates whether the Databridge Sync Item Outbound transaction is activated. Example: Y	No
@SYNCPRJ	This code indicates whether the Databridge Sync Proj Info Outbound transaction is activated. Example: Y	No
@SYNCRES	This code indicates whether the Databridge Sync Reservation transaction is activated. Example: Y	No
@SYNCWO	This code indicates whether the Databridge Sync Maint Order transaction is activated. Example: Y	No
@UPDINV	This code indicates whether the Databridge Update Invy Outbound transaction is activated. Example: Y	No
@UPDPTM	This code indicates whether the DatabridgeUpdate Person Time Outbound transaction is activated. Example: Y	No
~QUEUES~	Number of concurrent queues. Example: 1	No
~SLEEP~	This code indicates the interval time (in seconds) for the `BDRV` driver. Example: 15	No
~SLEEPB0	This code indicates the interval time (in seconds) for `BDRV` queue 0. Example: 86400	No
~SLEEPT0	This code indicates the interval time (in seconds) for `TDRV` queue 0. Example: 3600	No
7IACDKEY	HxGN EAM CD key. Example: 000-0000-00000-XXXX	No
7IBCDKEY	HxGN EAM Barcode module CD key. Example: 000-0000-00000-0000	No
7ICCDKEY	HxGN EAM Reports Consumer CD Key. Example: 000-0000-00000-XXXX	No
7IMCDKEY	HxGN EAM Mobile CD key. Example: 000-0000-00000-000A	No
7IPCDKEY	HxGN EAM Reports Author CD Key. Example: 000-0000-00000-XXXX	No
7IWCDKEY	HxGN EAM Mobile CD key. Example: 000-0000-00000-000C	No
ACCOUNT	This code indicates whether accounting information is to be upgraded to use the `DR/CR` format `(YES)` or uses * for all accounts `(NO)`. Example: YES	No
ADVREPT	Indicates whether you are using the HxGN EAM Advanced Reporting or another reporting product. Set to `YES` to indicate that you are using the Advanced Reporting Module. Set to `NO` if you are using another reporting product. Example: YES	No
ALWUSRCR	Will allow or restrict the Just In Time User creation. Example: YES, NO	No
AMSGCOST	Indicates the maximum allowable SQL score for Alert Management grid Dataspies. Example: 250	No
APPLGWH	Specifies the width and height of the image displayed on the header of the application in `widthxheight` format. Example: 25x25	No
APPLOGO	Determines the image displayed on the header of the application. Specify the URL location of the image to display it. Leave blank to use the default image. Note: If a value is specified, setting a value for `APPLGWH` is also strongly recommended. Example: http://google.com/image.gif
APPNAME	Determines the application name displayed on the login page and the header of the application. To display the default application name, leave blank. To exclude or not display an application name, enter a hyphen. To display an alternate application name, specify it.	No
ARCHTIME	This code indicates the time of day at which the archiving process runs. Values are in 24-hour time (0-23). The default is `‘2’` (2:00 A.M.) Leave this value blank to execute the archiving process immediately. Example: 2	No
ARCREC	This code indicates whether HxGN EAM stores error records from the data collection module in table `R5ARCINTERRORS`. If set to `YES`, the system stores the records in `R5ARCINTERRORS`. If set to `NO`, the system does not store the records. Example: NO	No
ASDEPTYP	Default depreciation method: This code indicates the default depreciation method for asset depreciation. However, you can also set the depreciation method at the organization level. `SL`= straight line `SYD`=sum of years digits `DDB`=double declining balance `UOO`= units of output Example: SL	No
AUTOANUM	This code indicates whether HxGN EAM automatically generates asset numbers. Example: NO	-
AUTOKBNM	This code indicates whether the system auto-generates knowledge base article codes. Valid values are `‘YES’` and `‘NO.’` Example: NO	No
BIRSTPAS	Birst Password for Single User Environment	No
BIRSTSP	Birst Space ID for Birst Deployed Environment	No
BIRSTURL	Birst Server URL and Port	No
BIRSTUSR	Birst Users for Single User Environment	No
BRETRIES	Maximum number of retries in the `BDRV` driver. Example: 5	No
CASCADE	This code indicates whether cascading occurs for cost code changes made on the equipment forms (Asset, Position, System) to the Equipment tab of the PM form. Example: YES	No
CAETYPE	Determines which external code type the application will extract from the client certificate, and store in r5users.usr_externcode (External User ID field on the Users screen in EAM). External code types: 1. Common Name (CN): extracted from Distinguished Subject Name 2. Electronic Data Interchange Personal Identifier (EDIPI): 10-digit number extracted from Common Name	CN, EDIPI
CALOGOUT	Determines the URL the user is directed to when certificate-based client authentication is used.	http:/www.infor.com
CCMNGLID	Specify an EAM user ID to be used by the application when accessing IDM. This is only used when accessing IDM is not the result of a direct EAM user action, such as the Service Request Portal. The EAM User ID and External User ID are populated based on the valid user ID specified here, and then used by the application to access IDM. Example: a valid EAM user ID	No
CDKEY	CD key code. Enter the number from the CD label in `MP5SET.SQL` when installing the HxGN EAM Oracle database. Example: 000-00A0-00000-B0C0	No
CDKEYAM	Advanced Mobile CD key code.
CDKEYMR	Mobile Requestor CD key code.
CDKEYREQ	HxGN EAM Requestor CD key code. Example: 000-00A0-00000-B0C0	No
CGMPONLY	This code indicates whether HxGN EAM will create an electronic record and/or require an electronic signature for work performed on `cGMP` equipment. To configure electronic records and signatures for `cGMP` equipment, you must set this parameter to `YES` and set up electronic records and signatures for the `EVNT` entity. If `CGMPONLY` is set to `YES` and you have configured electronic records/signatures for the `EVNT` entity, HxGN EAM will only create an electronic record and/or require an electronic signature for any work orders created for `cGMP` equipment. If `CGMPONLY` is set to `NO` and you have configured electronic records and signatures for the `EVNT` entity, HxGN EAM will create electronic records and/or require an electronic signature for all work performed on any equipment. Example: NO	No
CLNTAUTH	Determines if certificate based client authentication is enabled or disabled for the application.	No, Yes
CMORGALL	Select `Yes` to add all common Org.'s to the new users, and to attach a new common Org. to all users. Select `No` if you don't want to add all common Org.'s to the new users, and you do not want to attach a new common Org. to all users. Select `` to add `` common Org.'s to the new users, and to attach a new `` common Org. to all users. Example:	No
CSVDATEF	`CSV` Export date format. This is the java format of the date fields to be exported. Example: YYYY-MM-DD	No
DBNAME	This code identifies your database, such as `‘Production’`, ‘`Development’` or `‘TEST’`. The install parameter also supports the use of four standard variables: `MP5USER`, `:MP5DFLTORG`, `:MP5GROUP`, and `:MP5ORG`. Example: Production	No
DEFCALLR	This code defines the default value for Find Caller By on Service Request. `1` = E-mail, `2` = Customer, `3` = Name, `4` = Phone. Valid values are `1`, `2`, `3`, and `4`.	No
DEFCURR	Base currency. All rates for other currencies refer to this default currency. Do not change this setting once in use. After you set this default, you cannot change it without introducing inconsistencies to the database. Example: EUR	No
DEFLANG	Base language. HxGN EAM uses this parameter during installation. Do not change this setting once in use. After installation, you cannot change this value because HxGN EAM cannot retrieve certain system records in an alternative language. Example: FR	Yes
DEFORG	Default Organization value for entities with multi-organization security set to `OFF`. Example: *	Yes
DSSLTIME	The amount of time, in seconds, that will flag a Dataspy as slow. Once it is flagged as slow, the user will be warned each time they attempt to run the Dataspy. Leave blank to disable. Example: 60, 90	No
DOCCOMM	Controls the organization available for selection during the uploading of new documents. If set to ON, users can upload new documents to common organizations. If set to OFF, uploading new documents is restricted to specific organizations only. Note: This parameter does not affect the Profile Picture or image link buttons, the Documents screen, or web services through which common documents can still be uploaded. Example: ON, OFF	No
DOCOPEN	Set to YES to open documents in a new window when users view documents. Set to OFF to always download the document rather than view the document. Note: Browser settings may impact results. Example: ON, OFF
DOCOVRWR	Set to YES to allow previously uploaded documents to be updated. If set to YES, a copy of the overwritten document is not maintained. Set to NO to prevent overwriting previously uploaded documents. This parameter is not enforced when Infor Document Management (IDM) is in use.
DUALCURR	Dual currency. `EUR` indicates whether to use the triangular conversion method to convert currency amounts to and from `EURO` currency. Example: EUR	No
ENXHOST	ENX Suite Host URL (e.g. http://servername:8080/enxsuite)	No
EPAKURL	URL path for the EPAK server. This path will be used to display `EPAK` content for HxGN EAM. Example: http://www.google.com/?what=yes	No
ESIGMODE	Electronic signature mode: Set to U to default the User ID on the electronic signature pop-up window. Set to B to require only one signature for a batch update of multiple records. Set to UB to default the User ID, and require only one signature for a batch update of multiple records. Leave blank to require the User ID to be manually entered, and to require a signature for each impacted record of a batch update. Example: UB	No
ESMONTHS	Number of months for which to (re)calculate Energy Star readings. For example, if the current month is May and the number of months is set to 3, then readings will be created for February, March, and April. Example: 3	No
FAAMOD	Electronic signature mode: Set to ON for FAA which requires the Certificate Number and Certificate Type fields. Set to OFF for FDA which does not use the Certificate fields. Example: OFF	No
FLXAUDIT	This number determines the number of milliseconds after which the performance of Flex statements will be audited if the statement takes longer. Example: 999999	No
FRONTPG	Print front page code. This code indicates the default value for Include Front Page on the Print dialog box. The default value for this parameter is `YES`. If the parameter is set to `YES`, Include Front Page is selected by default. If the parameter is set to `NO`, Include Front Page is unselected by default.	No
GDPROPTN	Set to ON to enable the Revoke option for Callers, Contacts, Employees, Supervisors and Users. Set to OFF to hide the Revoke option.	No
GRIDCOST	`SQL` score for Dataspies. Example: 100	No
HOSTED	This code indicates whether the installation is hosted.	Yes
HTMLCOMM	Set to ON to display the HTML editor bar on the Comments page. Set to OFF to hide the HTML editor bar. Example: OFF	No
HTMLKB	Set to ON to enable HTML-editing capability on the Article Text field on Knowledge Base Articles. Set to OFF to disable HTML-editing capability. Example: ON, OFF	No
IDMSRVR	URL of the Infor Document Manager application server. Example: IDM URL(e.g. https://servername:8080/ca/)	No
IMSCKEY	Access Key/Consumer Key to be configured for IMS to be used for OAuth. Note: This value should never be null.	databridgeims
IMSSKEY	Secret key Value to be configured for IMS to be used for OAuth.
INBXSCOR	`SQL` score for inbox queries. The setting of this parameter determines whether or not the system will allow inbox queries to run that do not have a sufficient score. Example: 100	No
INCRLINO	Increment value. Enter the value by which to increase the line number when automatic line numbering is activated. Example: 1	No
INSPCFV	Indicates whether to use the inspection type `C`, `F`, `V` in HxGN EAM Mobile. Valid values are `YES` or `NO`. Example: NO	No
INSTCODE	Installation code. HxGN EAM uses it for several internal checks. Do not change this code.HxGN EAM will not function if you modify this code. Example: YD04O5VXVXY2	Yes
KEEPBOT	Keep boiler texts. A `+` value indicates HxGN EAM will not overwrite user-adapted boilertexts when you upgrade the system. Example: +	No
KIOSKREP	This is the URL for the Kiosk Reports http://reportserver:80/bi/v1/disp	No
KPISCOR	`SQL` score for KPI queries. Example: 100	No
KPISLEEP	Enter, in days, how often the KPI driver (KDRV) checks for data to process. Must be a positive integer. Example: 1	No
LDAPPATH	Enables the LDAP server component for HxGN EAM. Example: OFF	No
LDAPSERV	The URL identifying the location of the LDAP servlet. Example: http://myserver.mycompany.com: 8080/oc4jldap/LDAPAuth	No
LGNCON	This code stores the login authentication method used for the HxGN EAM Connector(web services) users. Set to `STD`to use the credential defined on user records within EAM. Set to `LDAP` to use the credential defined in the LDAP provider configured for the EAM deployment. Set to `EXT` to use an external authentication service configured for the EAM deployment. Example: STD	No
LGNDBR	This code stores the login authentication method used for Databridge users. Set to `STD`to use the credential defined on user records within EAM. Set to `LDAP` to use the credential defined in the LDAP provider configured for the EAM deployment. Set to `EXT` to use an external authentication service configured for the EAM deployment. Example: STD	No
LGNDISCL	Specifies the text displayed on the login page. This message can include html tags.	No
LGNEAM	This code stores the login authentication method used for EAM web users. Set to `STD`to use the credential defined on user records within EAM. Set to `LDAP` to use the credential defined in the LDAP provider configured for the EAM deployment. Set to `EXT` to use an external authentication service configured for the EAM deployment. Example: STD	No
LGNLOGOL	Determines the image displayed on the login page. Specify a URL location of the image to display it. Leave blank to use the default image.	No
LGNMOB	This code stores the login authentication method used for HxGN EAM Mobile users. Set to `STD`to use the credential defined on user records within EAM. Set to `LDAP` to use the credential defined in the LDAP provider configured for the EAM deployment. Set to `EXT` to use an external authentication service configured for the EAM deployment. Example: STD	No
LOCALE	This code identifies the number format to use based on the geographic location of your organization/enterprise. The setting for this code specifies that HxGN EAM use the geographic standard for the specified locale regarding the use of decimals and commas in numeric data for all numeric fields. Valid values are `NAMERICA`, `EUROPE`, and `ASI`Use the credential defined on user records within EAM. Example: NAMERICA	No
MAILRCAP	Define number of retries for failed e-mails and push notifications. Example: 3	No
MENUSECU	This code determines whether or not the user can hyperlink to hidden menu items. Turn OFF to allow hyperlinks to hidden menu items. Turn ON to prohibit hyperlinks to hidden menu items. Note: Regardless of this parameter setting, users are required to have screen permissions set for (access) to hyper linking to screens.
MFACLASS	Specify the full package Java class name of the customer implementation for multi-factor authentication. There is no default value.	No
MOBDOCUL	Specify a suffix that will be appended to the document file name when uploaded from the mobile device to the HxGN EAM server. This is done to better ensure uniqueness and help prevent files from being overwritten on subsequent uploads. Valid values are acceptable using comma separation. Default is `DATETIME`. Example: DATETIME	No
MOBGICIM	Specify the Permit to Work UDF field, text or number type, that will be used to store total number of customers impacted by a main isolation.	No
MOBGICVI	Specify the Permit to Work UDF field, text or number type, that will be used to store total customer volume interrupted by a main isolation.	No
MOBGIHIM	Specify the Permit to Work UDF field, text or number type, that will be used to store total number of hydrants impacted by a main isolation.	No
MOBGIMLR	Specify the main layer name. These features can be isolated. The layer name should exist in the feature service specified by the MOBGMAP parameter.	No
MOBGIMTD	Specify the task plan whose Isolation Method check box is selected that will be used to create all permit to work records for main isolations.	No
MOBGIPMT	Specify the permit code that will be used as a template to create all permit to work records for main isolations.	No
MOBGIPSW	Specify the standard work order code used to create the parent, repair work order for a main isolation.	No
MOBGIVLR	Specify the valve layer name. These features will be operated to isolate mains. The layer name should exist in the feature service specified by the MOBGMAP parameter.	No
MOBORG	This code indicates the HxGN EAM Mobile organization downloading mode. Set `MOBORG` to `YES` for multiple organization mode, or`NO` for single organization mode. Example: NO	No
MSRDWNCT	The maximum time, in Hours, before deleting a downloaded file generated by the Mobile Sync Request process from the server. Example: 6	No
MSRSTLCT	The maximum time, in Hours, before deleting a file generated by the Mobile Sync Request process from the server. Example: 24
MULTIFAC	Set to `ON` to enable the ability to enter an authentication code in addition to the password on the login screen. Custom configuration is required to enable this option. Set to `OFF` to hide the additional field and only require user name and password. Example: OFF	No
MULTIORG	This code indicates whether Multi-organization Security (MOS) is activated. You cannot turn off MOS. Example: YES	Yes
OMBARFMT	This code indicates whether a code and organization are separated with parentheses in HxGN EAM Barcoding. Valid values are `YES` or `NO`. Example: NO	No
OPENMENU	This code indicates whether users open the main menu by hovering or clicking. Set to `H` to default the system to open the menu drop-down when the user hovers the mouse over the main menu bar. Set to `C` to default the system to open the menu drop-down when the user clicks on the main menu bar. Navigation inside the menu defaults to hover regardless of this setting. Example: H	No
OURCOMP	Customer name that appears on reports. Modify this code as necessary. Example: Your company	No
PASSMINL	Indicates the minimum number of characters allowed for a system password. Example: 6	No
PASSMAN	Indicates the minimum number of non-alphanumeric characters required for a password. Example: 0	No
PASSMNLR	Indicates the minimum number of lowercase characters required for a password. Example: 0	No
PASSMNNB	Indicates the minimum number of numerical characters required for a password. Example: 0	No
PASSMNUP	Indicates the minimum number of uppercase characters required for a password. Example: 0	No
PASSRSET	Determines if the Password Reset option will be displayed on the login screen. If enabled, the system will require the user to enter a valid User ID for which to reset the password. If an email address is specified for the User ID, then the user's password will be reset to a random value and also set to expired. This will require the user to change their password as soon as they login using the system generated password. This option will only work for full EAM users, HxGN EAM Requestor users and Mobile users. Example: YES	No
PASSSAID	Indicates whether the User ID can be used as their password. Valid values are `YES` or `NO`. Example: YES	No
PASSUPER	Indicates whether system allows mixed case for password verification. If set to `YES`, the system does not use mixed case in password verification. If set to `NO`, the system uses mixed case in password verification. Example: YES	No
PMFSNDEL	Indicates the number of days a PM Forecasting session in which forecasting has not been started or a WO Labor Scheduling session in which labor has not been started will be saved. Sessions where forecasting or labor scheduling have begun will be saved until the session is Canceled or Approved. Example: 30	No
PRMDSPLY	Indicates the number of HxGN EAM Mobile prompts displayed. If set to `SINGLE`, the system displays HxGN EAM Mobile Prompt in Single Field mode. If set to `MULTIPLE`, the system displaysHxGN EAM Mobile Prompt in Multiple Fields mode. Example: MULTIPLE	No
PMRVSIGN	This code indicates whether both electronic signature and snapshot are required for PM Revision Control. `ES` = both electronic signature and snapshot required `ER` = only snapshot	No
PRODNAME	Name of the product installed. You can modify this code as necessary. Example: HxGN EAM	No
PRODUCTS	Name of the products used. Values are as follows: `EXTSQL`, If you are using HxGN EAM for SQL Server only `EXTORCL`, If you are using HxGN EAM (Oracle) only `D7I`, If you are using the Forms interface only `BOTH`, If you are using both Forms interface and Extended interface Example: D7I	No
QUICKDEF	This code sets the default value for the Operator field on the Quick Filter portion of the Search Bar and Dataspies. Set `QUICKDEF` to `B` for Begins with and `C` for Contains. Applies to text fields only. Example: B	No
REFRSHLV	Set to `YES` to designate the system to refresh the data when users return to the List View page from the Record View page or any other tab. Set to `NO` to designate the system to not refresh the List View page. Example: YES	No
REPBATCH	This code indicates whether to print reports on the server printer (`YES`) or on the client printer (`NO`). Note: HxGN EAM always treats this parameter as set to `NO`. Example: NO	No
REPSERV	The name of the default Oracle report server. Do not use underscores (_) or numbers in the name. Example: rep78	No
REPSTOL	The amount of time in minutes a report is kept in cache for reuse. Example: 10	No
RMTMOUT	Time out setting for HxGN EAM Mobile Real-time web service request, (in seconds). Example: 20	No
ROLESECU	Enables roles functionality. Set to OFF to turn off roles functionality. Set to ON to enable roles functionality, which allows the defining of roles along with a user and Organization to allow multiple user Groups per Organization.
S3BKTPTH	Define the Amazon S3 bucket path to where documents will be stored. It should follow the following pattern: [region]bucketname/path/to/shared/storage	No
S3DBKPTH	Define the Amazon S3 bucket path for Databridge to where documents will be stored. It should follow the following pattern: [region]bucketname/path/to/shared/storage	No
S3PROF	Define Amazon S3 profile (access key information) for accessing S3 storage. Providing a value here will override the default profile.	No
S3STOR	Set to ON to use Amazon S3 for document storage instead of the HxGN EAM server. Otherwise set to OFF. Example: OFF	No
S3STORDM	Set to ON to use Amazon S3 to store Databridge messages. Otherwise set to OFF. Example: OFF	No
SAFEWARN	Equipment safety warning for HxGN EAM Mobile. See HxGN EAM Mobile documentation. Example: NO	No
SCNCACHL	Controls whether a screen with caching Enabled will open to the List View or to the last tab selected prior to leaving the screen. Set to ON to return to the List View. Set to OFF to return to the last tab selected. Example: OFF	No
SDATE	This code determines the transaction date HxGN EAM uses for recording/approving a physical inventory in the`R5TRANSACTIONS` table and the `R5TRANSLINES` table. For example, if you start your count on Monday and finish it on Wednesday, this parameter determines which date is recorded. If `YES`, the system records the start date. If `NO`,HxGN EAM uses the date the count is approved. Example: NO	Yes
SECUPWEP	Number of days in the password expiration period. You can change this value. Example: 30	No
SECUPWRP	Number of days before a user can reuse an expired password. You can change this value. Example: 180	No
SECUVIOL	Number of consecutive password violations that can occur before a user is locked out of HxGN EAM. You can change this value. The system administrator can also unlock the user. Example: 5	No
SESINTVL	Must be set to support multiple application servers. The value specified for this parameter represents a number in minutes. If a session remains inactive for the number of minutes specified for this install parameter, the system will kill the session. Note: The system actually doubles the value specified for this parameter setting to create a buffer to ensure that a valid session is not killed. Also, if a value of less than `5` is specified, the system assumes a value of `5` minutes as the setting for the parameter. Example: 15	No
SHOWQURY	This code indicates whether to show the query fields on grids by default. Set `SHOWQURY` to `YES` to show the query fields on grids by default, or set to `NO` to hide the query fields on grids by default. Example: NO	No
SPECJS	Set `SPECJS` to `YES` to use the tenant specified language `js` file. Set `SPECJS` to `NO` to use the common language `js` file. Example: NO	Yes
SRDFLTID	Service Request Portal Default ID. Enter the Portal ID that will be used for guests. This Portal ID must have an existing contact information record.	No
STYLECD	Identifies the custom web style sheet and associated images. Example: default	No
TABSAVE	Set `TABSAVE` to `INSERT` to return to Insert Mode after modifying a record on List/Detail tabs. Set `TABSAVE` to `UPDATE` to stay in Update Mode after modifying a record. Example: INSERT	No
TRANDESC	Transaction description. Changing the value does not affect existing data. Example: Transaction	No
UCOLANG	Language code of default user code. Do not change this setting once in use. Example: EN	Yes
UPLNXS	This code identifies a separate index tablespace for all conversion data uploaded.	No
UPLTBS	This code identifies a separate data tablespace for all conversion data uploaded.	No
USEIMAGE	This code prevents using the Icon Path or Image Path on screens across the application. If set to YES, the Icon Image field and Upload Image button are the only methods for associating images. Note: When this parameter is set to YES and Icon is set to Other, the record cannot be updated until Icon is updated. If set to NO, either field can be used.
WOBARFMT	This code indicates whether work order barcodes are printed in WO#ACT format. Valid values are `YES` or `NO`. Example: NO	No
WMWARN	If set to `NO`, the system will check the Associations tab of the Workspace Move for any additions or deletions of Asset, Parts, Employees, or changes in Part quantity. The system will refresh the Associations tab if any changes are found when performing a status change from any open or approved status to any open or approved status. If set to `YES`, the system will not perform this check. Example: NO	No
WSGRIDSZ	This code indicates the maximum number of rows returned per block for web service grid. Example: 10000	No
XFRMOPTN	To set the X-FRAME-OPTIONS http header, set this install parameter to one of the following values: `DENY`, `SAMEORIGIN`, or `ALLOW-FROM` someurl. Setting this value protects against certain security vulnerabilities (clickjacking) by preventing HxGN EAM from running in an iframe. Example: Null (disabled)	No
XITENANT	The tenant to use when communicating to other Infor applications inside of Ming.le Xi. The value is typically set to "infor".

$BTRACE

Enables the BAIM trace utility. Set the parameter to Yes to enable the trace functionality. Set the parameter to No to disable the trace functionality. The default value for this parameter is No and should only be set to Yes at the request of a customer support technician.

Example: No

No

$CATSF

Financial Parameter for Category code for type SF.

Example: 1

No

$CATSH

Financial Parameter for Category code for type SH.

Example: 1

No

$CATST

Financial Parameter for Category code for type ST.

Example: 1

No

$LTRCDIR

Identifies the trace file directory created on the HxGN EAM server for the insertion of trace files for local transactions

The value used in this parameter should be from the perspective of someone looking at a command prompt on the server. Do not use the value of a mapped drive.

Example: F:\BAIMTRACE

No

$REQNUM

Parameter for Requisition Number from HxGN EAM to be sent to APPS.

Example: YES

No

$RTRCDIR

Identifies the trace file directory created on the Oracle Applications server for the insertion of trace files for remote transactions

You must only specify a value for $RTRCDIR for implementations in a distributed environment. The value used in this parameter should be from the perspective of someone looking at a command prompt on the server. Do not use the value of a mapped drive.

Example: F:\BAIMTRACE

No

$SERVUOM

Unit of Measure for Service types to be sent to APPS.

Example: EA

No

$SFLTYPE

Financial Parameter for Line type for type SF.

Example: 1

No

$STLTYPE

Financial Parameter for Line type for type SH,ST.

Example: 1

No

@ADDPO

This code indicates whether the Databridge Add PO Outbound transaction is activated.

Example: Y

No

@ADDREQ

This code indicates whether the Databridge Add Requisition transaction is activated.

Example: Y

No

@CANPO

This code indicates whether the Databridge Cancel PO Outbound transaction is activated.

Example: Y

No

@CANPORL

This code indicates whether the Databridge Cancel requisition lines for Cancel PO Inbound transaction is activated.

Example: N

No

@CANREQ

This code indicates whether the Databridge Cancel Requisition transaction is activated.

Example: Y

No

@CHGPO

This code indicates whether the Databridge Change PO Outbound transaction is activated.

Example: Y

No

@CHGREQ

This code indicates whether the Databridge Change Requisition is activated.

Example: Y

No

@CSMGMT

This code indicates whether the Databridge Case Management outbound event is activated.

Example: N

@DBPID

Databridge DUNS+4 partner ID.

Example: 2

Yes

@DOCKREC

Indicates whether the Databridge ReceivePO transaction will support on-dock receipts. Set to Y to enable on-dock receipts for the ReceivePO transaction.

Example: N

No

@HMSINT

HxGN EAM is integrated with Infor HMS. Enter YES if integrated. Enter NO if not integrated.

Example: NO

No

@INVREAP

Determines if Databridge will re-approve an approved invoice. If NO, the approved invoice will not be re-approved by Databridge, and no field except paid date is editable. If YES, Databridge will update and re-approve an approved invoice. This is default.

Example: YES

No

@LDPAY

This code indicates whether the Databridge Load Payable Outbound transaction is activated.

Example: Y

No

@MSGARCA

Determines if all messages get archived earlier than the archive cut-off date. Specify Y or N.

No

@NEWACT

This code indicates whether to automatically create an activity when INFOREAM.ACT tag is null.

Example: N

No

@NEWPART

This code indicates whether to automatically create a new part when ITEM tag is null.

Example: N

No

@NITMOUT

This code indicates whether the Databridge Sync Item Outbound transaction exports temporary parts.

Example: N

No

@PORECV

This code indicates whether the Databridge Receive PO Outbound transaction is activated.

Example: Y

No

@SECROLE

Determines if security role outbound is activated.

Example: N

No

@STRBIN

Is Store bin outbound activated?

Example: N

No

@SUPRMA

The Supplier RMA Outbound option determines whether the event is enabled. If Yes, when a supplier return is approved, Databridge generates an event. If No, Databridge will not generate an event.

Example: N

No

@SYNCITM

This code indicates whether the Databridge Sync Item Outbound transaction is activated.

Example: Y

No

@SYNCPRJ

This code indicates whether the Databridge Sync Proj Info Outbound transaction is activated.

Example: Y

No

@SYNCRES

This code indicates whether the Databridge Sync Reservation transaction is activated.

Example: Y

No

@SYNCWO

This code indicates whether the Databridge Sync Maint Order transaction is activated.

Example: Y

No

@UPDINV

This code indicates whether the Databridge Update Invy Outbound transaction is activated.

Example: Y

No

@UPDPTM

This code indicates whether the DatabridgeUpdate Person Time Outbound transaction is activated.

Example: Y

No

~QUEUES~

Number of concurrent queues.

Example: 1

No

~SLEEP~

This code indicates the interval time (in seconds) for the BDRV driver.

Example: 15

No

~SLEEPB0

This code indicates the interval time (in seconds) for BDRV queue 0.

Example: 86400

No

~SLEEPT0

This code indicates the interval time (in seconds) for TDRV queue 0.

Example: 3600

No

7IACDKEY

HxGN EAM CD key.

Example: 000-0000-00000-XXXX

No

7IBCDKEY

HxGN EAM Barcode module CD key.

Example: 000-0000-00000-0000

No

7ICCDKEY

HxGN EAM Reports Consumer CD Key.

Example: 000-0000-00000-XXXX

No

7IMCDKEY

HxGN EAM Mobile CD key.

Example: 000-0000-00000-000A

No

7IPCDKEY

HxGN EAM Reports Author CD Key.

Example: 000-0000-00000-XXXX

No

7IWCDKEY

HxGN EAM Mobile CD key.

Example: 000-0000-00000-000C

No

ACCOUNT

This code indicates whether accounting information is to be upgraded to use the DR/CR format (YES) or uses * for all accounts (NO).

Example: YES

No

ADVREPT

Indicates whether you are using the HxGN EAM Advanced Reporting or another reporting product. Set to YES to indicate that you are using the Advanced Reporting Module. Set to NO if you are using another reporting product.

Example: YES

No

ALWUSRCR

Will allow or restrict the Just In Time User creation.

Example: YES, NO

No

AMSGCOST

Indicates the maximum allowable SQL score for Alert Management grid Dataspies.

Example: 250

No

APPLGWH

Specifies the width and height of the image displayed on the header of the application in widthxheight format.

Example: 25x25

No

APPLOGO

Determines the image displayed on the header of the application. Specify the URL location of the image to display it. Leave blank to use the default image.

Note: If a value is specified, setting a value for APPLGWH is also strongly recommended.

Example: http://google.com/image.gif

APPNAME

Determines the application name displayed on the login page and the header of the application.

To display the default application name, leave blank.
To exclude or not display an application name, enter a hyphen.
To display an alternate application name, specify it.

No

ARCHTIME

This code indicates the time of day at which the archiving process runs. Values are in 24-hour time (0-23). The default is ‘2’ (2:00 A.M.) Leave this value blank to execute the archiving process immediately.

Example: 2

No

ARCREC

This code indicates whether HxGN EAM stores error records from the data collection module in table R5ARCINTERRORS. If set to YES, the system stores the records in R5ARCINTERRORS. If set to NO, the system does not store the records.

Example: NO

No

ASDEPTYP

Default depreciation method: This code indicates the default depreciation method for asset depreciation. However, you can also set the depreciation method at the organization level.

SL= straight line

SYD=sum of years digits

DDB=double declining balance

UOO= units of output

Example: SL

No

AUTOANUM

This code indicates whether HxGN EAM automatically generates asset numbers.

Example: NO

-

AUTOKBNM

This code indicates whether the system auto-generates knowledge base article codes. Valid values are ‘YES’ and ‘NO.’

Example: NO

No

BIRSTPAS

Birst Password for Single User Environment

No

BIRSTSP

Birst Space ID for Birst Deployed Environment

No

BIRSTURL

Birst Server URL and Port

No

BIRSTUSR

Birst Users for Single User Environment

No

BRETRIES

Maximum number of retries in the BDRV driver.

Example: 5

No

CASCADE

This code indicates whether cascading occurs for cost code changes made on the equipment forms (Asset, Position, System) to the Equipment tab of the PM form.

Example: YES

No

CAETYPE

Determines which external code type the application will extract from the client certificate, and store in r5users.usr_externcode (External User ID field on the Users screen in EAM).

External code types:

1. Common Name (CN): extracted from Distinguished Subject Name

2. Electronic Data Interchange Personal Identifier (EDIPI): 10-digit number extracted from Common Name

CN, EDIPI

CALOGOUT

Determines the URL the user is directed to when certificate-based client authentication is used.

http:/www.infor.com

CCMNGLID

Specify an EAM user ID to be used by the application when accessing IDM. This is only used when accessing IDM is not the result of a direct EAM user action, such as the Service Request Portal. The EAM User ID and External User ID are populated based on the valid user ID specified here, and then used by the application to access IDM.

Example: a valid EAM user ID

No

CDKEY

CD key code. Enter the number from the CD label in MP5SET.SQL when installing the HxGN EAM Oracle database.

Example: 000-00A0-00000-B0C0

No

CDKEYAM

Advanced Mobile CD key code.

CDKEYMR

Mobile Requestor CD key code.

CDKEYREQ

HxGN EAM Requestor CD key code.

Example: 000-00A0-00000-B0C0

No

CGMPONLY

This code indicates whether HxGN EAM will create an electronic record and/or require an electronic signature for work performed on cGMP equipment. To configure electronic records and signatures for cGMP equipment, you must set this parameter to YES and set up electronic records and signatures for the EVNT entity.

If CGMPONLY is set to YES and you have configured electronic records/signatures for the EVNT entity, HxGN EAM will only create an electronic record and/or require an electronic signature for any work orders created for cGMP equipment.

If CGMPONLY is set to NO and you have configured electronic records and signatures for the EVNT entity, HxGN EAM will create electronic records and/or require an electronic signature for all work performed on any equipment.

Example: NO

No

CLNTAUTH

Determines if certificate based client authentication is enabled or disabled for the application.

No, Yes

CMORGALL

Select Yes to add all common Org.'s to the new users, and to attach a new common Org. to all users. Select No if you don't want to add all common Org.'s to the new users, and you do not want to attach a new common Org. to all users. Select * to add * common Org.'s to the new users, and to attach a new * common Org. to all users.

Example: *

No

CSVDATEF

CSV Export date format. This is the java format of the date fields to be exported.

Example: YYYY-MM-DD

No

DBNAME

This code identifies your database, such as ‘Production’, ‘Development’ or ‘TEST’. The install parameter also supports the use of four standard variables: MP5USER, :MP5DFLTORG, :MP5GROUP, and :MP5ORG.

Example: Production

No

DEFCALLR

This code defines the default value for Find Caller By on Service Request. 1 = E-mail, 2 = Customer, 3 = Name, 4 = Phone. Valid values are 1, 2, 3, and 4.

No

DEFCURR

Base currency. All rates for other currencies refer to this default currency. Do not change this setting once in use. After you set this default, you cannot change it without introducing inconsistencies to the database.

Example: EUR

No

DEFLANG

Base language. HxGN EAM uses this parameter during installation. Do not change this setting once in use. After installation, you cannot change this value because HxGN EAM cannot retrieve certain system records in an alternative language.

Example: FR

Yes

DEFORG

Default Organization value for entities with multi-organization security set to OFF.

Example: *

Yes

DSSLTIME

The amount of time, in seconds, that will flag a Dataspy as slow. Once it is flagged as slow, the user will be warned each time they attempt to run the Dataspy. Leave blank to disable.

Example: 60, 90

No

DOCCOMM

Controls the organization available for selection during the uploading of new documents. If set to ON, users can upload new documents to common organizations. If set to OFF, uploading new documents is restricted to specific organizations only.

Note: This parameter does not affect the Profile Picture or image link buttons, the Documents screen, or web services through which common documents can still be uploaded.

Example: ON, OFF

No

DOCOPEN

Set to YES to open documents in a new window when users view documents. Set to OFF to always download the document rather than view the document.

Note: Browser settings may impact results.

Example: ON, OFF

DOCOVRWR

Set to YES to allow previously uploaded documents to be updated. If set to YES, a copy of the overwritten document is not maintained. Set to NO to prevent overwriting previously uploaded documents. This parameter is not enforced when Infor Document Management (IDM) is in use.

DUALCURR

Dual currency. EUR indicates whether to use the triangular conversion method to convert currency amounts to and from EURO currency.

Example: EUR

No

ENXHOST

ENX Suite Host URL (e.g. http://servername:8080/enxsuite)

No

EPAKURL

URL path for the EPAK server. This path will be used to display EPAK content for HxGN EAM.

Example: http://www.google.com/?what=yes

No

ESIGMODE

Electronic signature mode: Set to U to default the User ID on the electronic signature pop-up window. Set to B to require only one signature for a batch update of multiple records. Set to UB to default the User ID, and require only one signature for a batch update of multiple records. Leave blank to require the User ID to be manually entered, and to require a signature for each impacted record of a batch update.

Example: UB

No

ESMONTHS

Number of months for which to (re)calculate Energy Star readings. For example, if the current month is May and the number of months is set to 3, then readings will be created for February, March, and April.

Example: 3

No

FAAMOD

Electronic signature mode: Set to ON for FAA which requires the Certificate Number and Certificate Type fields. Set to OFF for FDA which does not use the Certificate fields.

Example: OFF

No

FLXAUDIT

This number determines the number of milliseconds after which the performance of Flex statements will be audited if the statement takes longer.

Example: 999999

No

FRONTPG

Print front page code. This code indicates the default value for Include Front Page on the Print dialog box. The default value for this parameter is YES.

If the parameter is set to YES, Include Front Page is selected by default. If the parameter is set to NO, Include Front Page is unselected by default.

No

GDPROPTN

Set to ON to enable the Revoke option for Callers, Contacts, Employees, Supervisors and Users. Set to OFF to hide the Revoke option.

No

GRIDCOST

SQL score for Dataspies.

Example: 100

No

HOSTED

This code indicates whether the installation is hosted.

Yes

HTMLCOMM

Set to ON to display the HTML editor bar on the Comments page. Set to OFF to hide the HTML editor bar.

Example: OFF

No

HTMLKB

Set to ON to enable HTML-editing capability on the Article Text field on Knowledge Base Articles. Set to OFF to disable HTML-editing capability.

Example: ON, OFF

No

IDMSRVR

URL of the Infor Document Manager application server.

Example: IDM URL(e.g. https://servername:8080/ca/)

No

IMSCKEY

Access Key/Consumer Key to be configured for IMS to be used for OAuth.

Note: This value should never be null.

databridgeims

IMSSKEY

Secret key Value to be configured for IMS to be used for OAuth.

INBXSCOR

SQL score for inbox queries. The setting of this parameter determines whether or not the system will allow inbox queries to run that do not have a sufficient score.

Example: 100

No

INCRLINO

Increment value. Enter the value by which to increase the line number when automatic line numbering is activated.

Example: 1

No

INSPCFV

Indicates whether to use the inspection type C, F, V in HxGN EAM Mobile. Valid values are YES or NO.

Example: NO

No

INSTCODE

Installation code. HxGN EAM uses it for several internal checks. Do not change this code.HxGN EAM will not function if you modify this code.

Example: YD04O5VXVXY2

Yes

KEEPBOT

Keep boiler texts. A + value indicates HxGN EAM will not overwrite user-adapted boilertexts when you upgrade the system.

Example: +

No

KIOSKREP

This is the URL for the Kiosk Reports http://reportserver:80/bi/v1/disp

No

KPISCOR

SQL score for KPI queries.

Example: 100

No

KPISLEEP

Enter, in days, how often the KPI driver (KDRV) checks for data to process. Must be a positive integer.

Example: 1

No

LDAPPATH

Enables the LDAP server component for HxGN EAM.

Example: OFF

No

LDAPSERV

The URL identifying the location of the LDAP servlet.

Example: http://myserver.mycompany.com: 8080/oc4jldap/LDAPAuth

No

LGNCON

This code stores the login authentication method used for the HxGN EAM Connector(web services) users. Set to STDto use the credential defined on user records within EAM. Set to LDAP to use the credential defined in the LDAP provider configured for the EAM deployment. Set to EXT to use an external authentication service configured for the EAM deployment.

Example: STD

No

LGNDBR

This code stores the login authentication method used for Databridge users. Set to STDto use the credential defined on user records within EAM. Set to LDAP to use the credential defined in the LDAP provider configured for the EAM deployment. Set to EXT to use an external authentication service configured for the EAM deployment.

Example: STD

No

LGNDISCL

Specifies the text displayed on the login page. This message can include html tags.

No

LGNEAM

This code stores the login authentication method used for EAM web users. Set to STDto use the credential defined on user records within EAM. Set to LDAP to use the credential defined in the LDAP provider configured for the EAM deployment. Set to EXT to use an external authentication service configured for the EAM deployment.

Example: STD

No

LGNLOGOL

Determines the image displayed on the login page. Specify a URL location of the image to display it. Leave blank to use the default image.

No

LGNMOB

This code stores the login authentication method used for HxGN EAM Mobile users. Set to STDto use the credential defined on user records within EAM. Set to LDAP to use the credential defined in the LDAP provider configured for the EAM deployment. Set to EXT to use an external authentication service configured for the EAM deployment.

Example: STD

No

LOCALE

This code identifies the number format to use based on the geographic location of your organization/enterprise. The setting for this code specifies that HxGN EAM use the geographic standard for the specified locale regarding the use of decimals and commas in numeric data for all numeric fields. Valid values are NAMERICA, EUROPE, and ASIUse the credential defined on user records within EAM.

Example: NAMERICA

No

MAILRCAP

Define number of retries for failed e-mails and push notifications.

Example: 3

No

MENUSECU

This code determines whether or not the user can hyperlink to hidden menu items. Turn OFF to allow hyperlinks to hidden menu items. Turn ON to prohibit hyperlinks to hidden menu items.

Note: Regardless of this parameter setting, users are required to have screen permissions set for (access) to hyper linking to screens.

MFACLASS

Specify the full package Java class name of the customer implementation for multi-factor authentication.

There is no default value.

No

MOBDOCUL

Specify a suffix that will be appended to the document file name when uploaded from the mobile device to the HxGN EAM server. This is done to better ensure uniqueness and help prevent files from being overwritten on subsequent uploads. Valid values are acceptable using comma separation. Default is DATETIME.

Example: DATETIME

No

MOBGICIM

Specify the Permit to Work UDF field, text or number type, that will be used to store total number of customers impacted by a main isolation.

No

MOBGICVI

Specify the Permit to Work UDF field, text or number type, that will be used to store total customer volume interrupted by a main isolation.

No

MOBGIHIM

Specify the Permit to Work UDF field, text or number type, that will be used to store total number of hydrants impacted by a main isolation.

No

MOBGIMLR

Specify the main layer name. These features can be isolated. The layer name should exist in the feature service specified by the MOBGMAP parameter.

No

MOBGIMTD

Specify the task plan whose Isolation Method check box is selected that will be used to create all permit to work records for main isolations.

No

MOBGIPMT

Specify the permit code that will be used as a template to create all permit to work records for main isolations.

No

MOBGIPSW

Specify the standard work order code used to create the parent, repair work order for a main isolation.

No

MOBGIVLR

Specify the valve layer name. These features will be operated to isolate mains. The layer name should exist in the feature service specified by the MOBGMAP parameter.

No

MOBORG

This code indicates the HxGN EAM Mobile organization downloading mode. Set MOBORG to YES for multiple organization mode, orNO for single organization mode.

Example: NO

No

MSRDWNCT

The maximum time, in Hours, before deleting a downloaded file generated by the Mobile Sync Request process from the server.

Example: 6

No

MSRSTLCT

The maximum time, in Hours, before deleting a file generated by the Mobile Sync Request process from the server.

Example: 24

MULTIFAC

Set to ON to enable the ability to enter an authentication code in addition to the password on the login screen. Custom configuration is required to enable this option. Set to OFF to hide the additional field and only require user name and password.

Example: OFF

No

MULTIORG

This code indicates whether Multi-organization Security (MOS) is activated. You cannot turn off MOS.

Example: YES

Yes

OMBARFMT

This code indicates whether a code and organization are separated with parentheses in HxGN EAM Barcoding. Valid values are YES or NO.

Example: NO

No

OPENMENU

This code indicates whether users open the main menu by hovering or clicking. Set to H to default the system to open the menu drop-down when the user hovers the mouse over the main menu bar. Set to C to default the system to open the menu drop-down when the user clicks on the main menu bar. Navigation inside the menu defaults to hover regardless of this setting.

Example: H

No

OURCOMP

Customer name that appears on reports. Modify this code as necessary.

Example: Your company

No

PASSMINL

Indicates the minimum number of characters allowed for a system password.

Example: 6

No

PASSMAN

Indicates the minimum number of non-alphanumeric characters required for a password.

Example: 0

No

PASSMNLR

Indicates the minimum number of lowercase characters required for a password.

Example: 0

No

PASSMNNB

Indicates the minimum number of numerical characters required for a password.

Example: 0

No

PASSMNUP

Indicates the minimum number of uppercase characters required for a password.

Example: 0

No

PASSRSET

Determines if the Password Reset option will be displayed on the login screen. If enabled, the system will require the user to enter a valid User ID for which to reset the password. If an email address is specified for the User ID, then the user's password will be reset to a random value and also set to expired. This will require the user to change their password as soon as they login using the system generated password. This option will only work for full EAM users, HxGN EAM Requestor users and Mobile users.

Example: YES

No

PASSSAID

Indicates whether the User ID can be used as their password. Valid values are YES or NO.

Example: YES

No

PASSUPER

Indicates whether system allows mixed case for password verification. If set to YES, the system does not use mixed case in password verification. If set to NO, the system uses mixed case in password verification.

Example: YES

No

PMFSNDEL

Indicates the number of days a PM Forecasting session in which forecasting has not been started or a WO Labor Scheduling session in which labor has not been started will be saved. Sessions where forecasting or labor scheduling have begun will be saved until the session is Canceled or Approved.

Example: 30

No

PRMDSPLY

Indicates the number of HxGN EAM Mobile prompts displayed. If set to SINGLE, the system displays HxGN EAM Mobile Prompt in Single Field mode. If set to MULTIPLE, the system displaysHxGN EAM Mobile Prompt in Multiple Fields mode.

Example: MULTIPLE

No

PMRVSIGN

This code indicates whether both electronic signature and snapshot are required for PM Revision Control.

ES = both electronic signature and snapshot required

ER = only snapshot

No

PRODNAME

Name of the product installed. You can modify this code as necessary.

Example: HxGN EAM

No

PRODUCTS

Name of the products used. Values are as follows:

EXTSQL, If you are using HxGN EAM for SQL Server only

EXTORCL, If you are using HxGN EAM (Oracle) only

D7I, If you are using the Forms interface only

BOTH, If you are using both Forms interface and Extended interface

Example: D7I

No

QUICKDEF

This code sets the default value for the Operator field on the Quick Filter portion of the Search Bar and Dataspies. Set QUICKDEF to B for Begins with and C for Contains. Applies to text fields only.

Example: B

No

REFRSHLV

Set to YES to designate the system to refresh the data when users return to the List View page from the Record View page or any other tab. Set to NO to designate the system to not refresh the List View page.

Example: YES

No

REPBATCH

This code indicates whether to print reports on the server printer (YES) or on the client printer (NO).

Note: HxGN EAM always treats this parameter as set to NO.

Example: NO

No

REPSERV

The name of the default Oracle report server. Do not use underscores (_) or numbers in the name.

Example: rep78

No

REPSTOL

The amount of time in minutes a report is kept in cache for reuse.

Example: 10

No

RMTMOUT

Time out setting for HxGN EAM Mobile Real-time web service request, (in seconds).

Example: 20

No

ROLESECU

Enables roles functionality. Set to OFF to turn off roles functionality. Set to ON to enable roles functionality, which allows the defining of roles along with a user and Organization to allow multiple user Groups per Organization.

S3BKTPTH

Define the Amazon S3 bucket path to where documents will be stored. It should follow the following pattern: [region]bucketname/path/to/shared/storage

No

S3DBKPTH

Define the Amazon S3 bucket path for Databridge to where documents will be stored. It should follow the following pattern: [region]bucketname/path/to/shared/storage

No

S3PROF

Define Amazon S3 profile (access key information) for accessing S3 storage. Providing a value here will override the default profile.

No

S3STOR

Set to ON to use Amazon S3 for document storage instead of the HxGN EAM server. Otherwise set to OFF.

Example: OFF

No

S3STORDM

Set to ON to use Amazon S3 to store Databridge messages. Otherwise set to OFF.

Example: OFF

No

SAFEWARN

Equipment safety warning for HxGN EAM Mobile.

See HxGN EAM Mobile documentation.

Example: NO

No

SCNCACHL

Controls whether a screen with caching Enabled will open to the List View or to the last tab selected prior to leaving the screen. Set to ON to return to the List View. Set to OFF to return to the last tab selected.

Example: OFF

No

SDATE

This code determines the transaction date HxGN EAM uses for recording/approving a physical inventory in the


								R5TRANSACTIONS

table and the R5TRANSLINES table. For example, if you start your count on Monday and finish it on Wednesday, this parameter determines which date is recorded. If YES, the system records the start date. If NO,HxGN EAM uses the date the count is approved.

Example: NO

Yes

SECUPWEP

Number of days in the password expiration period. You can change this value.

Example: 30

No

SECUPWRP

Number of days before a user can reuse an expired password. You can change this value.

Example: 180

No

SECUVIOL

Number of consecutive password violations that can occur before a user is locked out of HxGN EAM. You can change this value. The system administrator can also unlock the user.

Example: 5

No

SESINTVL

Must be set to support multiple application servers.

The value specified for this parameter represents a number in minutes.

If a session remains inactive for the number of minutes specified for this install parameter, the system will kill the session.

Note: The system actually doubles the value specified for this parameter setting to create a buffer to ensure that a valid session is not killed.

Also, if a value of less than 5 is specified, the system assumes a value of 5 minutes as the setting for the parameter.

Example: 15

No

SHOWQURY

This code indicates whether to show the query fields on grids by default. Set SHOWQURY to YES to show the query fields on grids by default, or set to NO to hide the query fields on grids by default.

Example: NO

No

SPECJS

Set SPECJS to YES to use the tenant specified language js file. Set SPECJS to NO to use the common language js file.

Example: NO

Yes

SRDFLTID

Service Request Portal Default ID. Enter the Portal ID that will be used for guests. This Portal ID must have an existing contact information record.

No

STYLECD

Identifies the custom web style sheet and associated images.

Example: default

No

TABSAVE

Set TABSAVE to INSERT to return to Insert Mode after modifying a record on List/Detail tabs. Set TABSAVE to UPDATE to stay in Update Mode after modifying a record.

Example: INSERT

No

TRANDESC

Transaction description. Changing the value does not affect existing data.

Example: Transaction

No

UCOLANG

Language code of default user code. Do not change this setting once in use.

Example: EN

Yes

UPLNXS

This code identifies a separate index tablespace for all conversion data uploaded.

No

UPLTBS

This code identifies a separate data tablespace for all conversion data uploaded.

No

USEIMAGE

This code prevents using the Icon Path or Image Path on screens across the application.

If set to YES, the Icon Image field and Upload Image button are the only methods for associating images.

Note: When this parameter is set to YES and Icon is set to Other, the record cannot be updated until Icon is updated.

If set to NO, either field can be used.

WOBARFMT

This code indicates whether work order barcodes are printed in WO#ACT format. Valid values are YES or NO.

Example: NO

No

WMWARN

If set to NO, the system will check the Associations tab of the Workspace Move for any additions or deletions of Asset, Parts, Employees, or changes in Part quantity. The system will refresh the Associations tab if any changes are found when performing a status change from any open or approved status to any open or approved status. If set to YES, the system will not perform this check.

Example: NO

No

WSGRIDSZ

This code indicates the maximum number of rows returned per block for web service grid.

Example: 10000

No

XFRMOPTN

To set the X-FRAME-OPTIONS http header, set this install parameter to one of the following values: DENY, SAMEORIGIN, or ALLOW-FROM someurl. Setting this value protects against certain security vulnerabilities (clickjacking) by preventing HxGN EAM from running in an iframe.

Example: Null (disabled)

No

XITENANT

The tenant to use when communicating to other Infor applications inside of Ming.le Xi. The value is typically set to "infor".